Extending on the “Little Chip” theme, I’ve created 11 highly audible alert tones for your phone or other purposes. They all use very basic tones and are kind of cute.

Use them for text/alert tones for iPhone or Android or any sort of application you might develop.

⇓ Download the mp3/m4r files

Little Chip Alert Tones, Vol. 1 by Ross Brown is licensed under a Creative Commons Attribution-NonCommercial 3.0 United States License.
Permissions beyond the scope of this license may be available at http://rossisbrown.com.

Recorded with a Cascade Fat Head I with Lundahl transformer through an Allen & Heath Mix Wizard pre and an ART Pro VLA II compressor to an Alesis HD24, then into the computer where extra dynamics processing from a UA 1176-esque plugin was applied.

I’ve been playing with Mat and Will for a while in a band called The Empty Spaces, morphing out of Mat’s solo project. We recently recorded a four song EP that is now available from Golden Sound Records. I played drums, engineered, and mastered it.

We recorded it live straight to an Otari 1/4” 2-track tape machine. It was my first real experience working with tape, but after a reel and a half of unspooled mess I started to get the hang of it. All tracks were mixed through an Allen & Heath Mixwizard WZ2 16:2 board. Mat’s vocals ran through a JOEMEEK TwinQ with some slap-back delay from a Roland RE-501.

I played my Gretsch Catalina club kit with my Tama Starclassic snare. All drums were fitted with Aquarian Modern Vintage heads except the kick drum, which sported a Remo Coated Ambassador on the batter side and a stock resonant head. I placed sheets of paper over the snare and floor tom heads for a little extra dampening and high frequency attack. The cymbals were a 21” Zildjan Sweet ride, an 18” Istanbul Mehmet Sultan Flat Ride, and 13” Zildjan K Custom Dark hats.

The kit was miked with a Cascade X-15 stereo ribbon mic overhead. I did have to boost some 12-15k for some high end (15k is as high as the MixWizard’s EQ goes) but I was really pleased with the self compression and beefiness of this mic. The kick drum was captured by an AKG D112, and the snare a good ol’ SM57, both running through dbx 163’s with a considerable amount of compression.

The bass was played through a Gibson G100-B 2x15” amp and miked with a Cascade Fat Head about a foot and a half away.

The stereo output of the mixer was routed to the ins of the Otari and we monitored from there, doing takes of the songs until we had ones we liked. The tape was hit pretty hard; you can really hear it on the snare. It made us a little nervous to throw down live takes straight to tape without someone actively listening to the mix in another room. There’s no mixing post 2-track, so we had to get it right before we recorded. I’m happy with what we ended up with, but it’s definitely one of those EPs where you can tell the drummer engineered it.

As a tribute to our experience, we laid out the packaging to look like the boxes the reels of Quantegy tape came in. The disc looks like a little reel of tape. It’s entertaining so the music doesn’t have to be.

We go on a week-long tour starting this weekend, hoping to sell copies and have some fun. It’s my goal to achieve at least one of those. Dates are up on the website. You can download a digital copy or order a CD from Golden Sound Records for $4/$5.

Everyday/Everynight’s new album etc. is now available on Golden Sound Records. I recorded and mixed the album and Josh Williams at BRC Audio Productions mastered it. It’s by far my favorite album of theirs to date. Still eclectic but very concise and flowing. Good and dreamy from start to finish.

I made heavy use of the ART Quadra/FX’s dynamic delay (check out the vocals on “Lolita”) and Roland RE-501 Chorus Echo.

I’m happy to announce the release of my band’s first album, The Perpetual Machine. It’s a project that was probably over two years in the making. I was fortunate enough to assemble the incredible band that is Fullbloods and make some great friends in the process. Mission accomplished.

The record label and online music distributor I created with Matt, Jerad and Mat. It has been a long time coming and it’s finally at a state we’re proud of.

Golden Sound sells full albums, available as CD + Digital Download packages or Digital Download only. We’re putting a lot of our philosophy about making and appreciating music behind this project, and I hope it shows. Your Golden Sound Records account tracks all the music you’ve purchased from us so you can return and download your albums as many times as you need in four different formats.

We encode each file with lyrics, album art, and track information. We also credit participating musicians on each track of a release and provide our artists with electronic press kits.

We’re excited.

My band, finally epitomized as a website. That’s me in the center with the rippling muscles. Glenn Shipps did an amazing job with the artwork.

I put the site together, building it on harmony, which I enjoyed thoroughly.

Poster I did for the Empty Spaces/Fullbloods/Kuhls show on January 8th.

See you there?

This mic loves guitar amps, and I love my guitar and amp.

Gretsch Duo Jet > Fender Deluxe Reverb > Cascade Fat Head on Signal Chains

Download 16 bit 44.1 khz AIFF (986kb)

Recently I have been in the process of recording a 12-song album with my band, and we’ve been doing a lot of tinkering in the studio. I’m really happy with the drum sounds we got on a particular song and thought I’d share a perfectly remix-able loop.

Here’s a two-bar drum pattern I played which I’m naming the Lucky Chopsticks Break for reference. Recorded in Studio A at BRC Audio Productions and processed at home.

• 18” x 14” Mahogany kick drum with coated single-ply coated heads on each side - AKG D112 placed on the batter side, very close to where the beater hit
• 14” x 5.5” Tama Brass Starclassic Snare Drum with Aquarian medium weight Modern Vintage heads - Sennheiser MD421 with a ton of 4k boosted on the Trident 90 EQ
• 14” Zildjan CIE Hi-hats - SE Electronics SE3 as an overhead

High-pass, buss compression, and the new Ableton Amp on the “blues” setting was all I did with this thing.

• Native tempo is 85.88 bpm
• 16 bit 44.1 khz
• 
  Lucky Chopsticks Break by Ross Brown is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.
  Permissions beyond the scope of this license may be available at http://rossisbrown.com.

Everyday/Everynight’s new album, “Trust: A Trip To The Center Of My Head” comes out today.

I engineered the sessions in the band’s house. Most of the base tracks were done live within a weekend’s time.

⇓ Download mp3

⇓ Download 24bit AIFF

Everybody does a cover of this song at some point, I’ve heard. I did mine about a year ago and never did anything with it. I made it a rule to use no digital synthesizers in this recording. The bass is a Yamaha CP-30, the drums and percussion are acoustic, and the rest is guitars. The swelling pad sounds were achieved with electric guitars through a Multivox Multi Echo MX-312.

If I remember correctly, most of the instruments were tracked mono with a Cascade Fat Head. Electric guitars were a G&L ASAT Special Semi-Hollow (Tribute) and a Mirage Beram. I think I ran them through a Electro-Harmonix Stereo Pulsar into an early 90’s made in USA Fender Hot Rod Deluxe. Drums were recorded with two separate distant-miked full kit tracks (panned hard left and right) and one close-ish miked snare track, all hitting the Pro VLA II pretty hard. That’s about all I remember. Enjoy.

Update: I added a chain for one of the guitar sounds in this recording. Shows a little about how I got the sound.

Goodbye Horses by Ross Brown is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
Permissions beyond the scope of this license may be available at http://rossisbrown.com.

Many of my friends no longer listen to music on CDs. Instead, their entire library is installed on the hard drive of their laptop, iPod, some cloud service, or all of the above. A complete digital library of every song they’ve ever considered worthwhile to them is accessible almost instantly from almost anywhere. If they happen to be missing a song, its retrieval is only a few clicks and a few cents away. Playlists of their top-rated songs are constantly and automatically updated. Online services can recommend them new tunes based on their past listening history. Music can easily be integrated in any part of their lives. And I think it’s completely wrong.

Label me old-fashioned but I’m scared to see the CD go away. Quite a few people of all shapes and sizes want them to go away. They’re expensive. They take up too much space. They’re an inconvenient extra step in the process of getting brand new songs to their real destination: your iTunes library. To be dramatic, I believe them to be the last distribution system that takes collections of music as an art form seriously.

To clarify, there’s nothing in particular I like about the technology of a compact disc. I wish they were prettier. I wish they were more immune to surface damage. I wish the audio quality was higher and the capacity was larger. To the average consumer, CDs are mere physical backups of digital copies they store elsewhere, and with large capacity hard drives so cheap, why bother keeping a bunch of 700mb discs around?

The way I see it, the beauty of a CD is its limitations. There are rules, and to be a player in the CD distribution market you must adhere by them. CDs are limited to 80 minutes of 16 bit, 44.1khz audio. If you want to release a collection of songs that totals longer than 80 minutes, you’re going to spread it across two discs. If you’re exceeding 80 minutes of music and you’re upping the physical cost of your product, you better darn well make the experience worth it.

Some may argue that this puts constraints on an artist and stifles their creativity. I’ll move past the fact that I disagree and bring up what I believe to be the most beneficial limitation: that of the listener. When you insert a CD in a CD player, you’re hearing what’s on that CD. You won’t be hearing anything from other albums you might have purchased. Pandora won’t be streaming you recommendations (and ads) based on the first few songs. The second track you listen to won’t be from an album that was recorded 10 years ago. When you insert a CD in a CD player you prepare yourself to experience a complete work without interference.

The first time I heard Steely Dan’s Peg it ranked a 5/10 on my awesomeness scale. It was on a compilation disc that spanned a chunk of their musical career; a greatest hits sort of thing. The tune, released on Aja in 1977, was sandwiched between a song from ‘74 and a song from ‘72. Listening straight through that compilation, Peg stuck out like a sore thumb. It sounded like a completely different band. I later learned that it actually was.

Recently I picked up the remastered CD of Aja and was able to give it a complete listen through with Peg in context. Suddenly the awesomeness rating was through the roof. Finally hearing that Peg was the intended booty-shaking successor to Deacon Blues was a pleasant experience. Nothing radical happened here, it just felt right. A common sonic theme was present throughout, and listening made complete sense. Once Josie finished, the album was over and the music stopped. Notice: the next Steely Dan album in my library did not automatically start playing. I was able to spend a little time in silence and reflect on the great collection of songs I had just listened to.

And then I pressed play and listened again. Why? Maybe I was lazy and didn’t want to swap out discs. Maybe I wanted to pay more attention to a different aspect of the recordings this time. Regardless, I was given another chance to absorb the tunes. That is, another chance to appreciate the tracks I didn’t like as much, cherish the gems, and pick up on some fascinating musical ideas. Skipping songs was something I thought about but never followed through with. I consider it difficult to not find at least one aspect that you can appreciate from a song you’re not particularly fond of, and over time you may learn to appreciate the whole thing. Think about how much more of a pain it was to skip songs on cassette tapes and vinyl.

The point is, I believe listening to an album on a format that limits you to that album only is a great way to listen to music. I’d hate to see CDs go because they’re the last medium I see that limits your listening experience in a good way. “Shuffle” is perhaps the worst technological advancement ever implemented in music playing devices. Shuffling across your entire library can take you to unexplored corners, but I shudder to think of a shuffle-only listening experience. And don’t even get me started on shuffling songs within an album…

⇓ Download Comparison Audio File

Paul Simon vs. Vampire Weekend…FIGHT!!!

First up is Paul Simon’s “Proof” from Rhythm Of the Saints, shortly followed by Vampire Weekend’s “White Sky” from Contra, pitched down a full step.

I’m not very familiar with Vampire Weekend, but Eric had this playing today and I thought it was a sample of “Proof”. It’s not.

I’m posting this audio for comparison only. You’ll have to come to your own conclusion.

Matt and I have been working on Signal Chains for a few months, and are finally somewhat ready for the public to see it. I’m going to create a crisis here to make what we did seem so much cooler:

The Problem: Audio gear is expensive. Few brick and mortar stores carry expensive audio gear and will let you get your grubby little hands all over it before purchasing. Conversely, when people post audio samples online, you’re not always sure what is involved. Is it really that mic that sounds that way? Or is the preamp they’re using coloring the sound?

The Solution: Signal Chains is essentially a way for audio engineers (or those who call themselves audio engineers) to share their signal flows through audio samples, documenting each piece and process involved. It does this by providing a somewhat standardized method of doing so.

The Pieces

Gear

The building blocks of Signal Chains. The tools that real engineers use to accomplish the sound they have in their head. Gear can be added by anyone, but and emphasis has been put on search in order to avoid duplicate entries. Gear can be added straight from the gear type page or on the fly during chain creation. When “browsing mics”:http://signalchains.com/mics, for example, I can select Condenser from “Type”. Doing this shows me only condenser mics in the database.

If I want to further narrow my search, I can enter AKG in “Make”. At the moment, there is only one AKG Condenser in the database (let’s change that!), so the C414 is listed. Alternatively, if I don’t find the AKG Condenser I’m looking for, I can add it by clicking the New Mic button. Doing this will over time build a large database of audio gear, with which we can take over the world.

Viewing a gear page gives you a list of chains that gear is involved in, allowing you to hear it in different scenarios.

As a side note, the whole concept for Signal Chains came from the amount of visits I get to my post about the Cascade Fat Head. I made a little song to test the mic out in different applications. Apparently lots of people want to know what this thing sounds like, so why not provide one central place for them to do so?

Chains

The heart of Signal Chains is, of course, the chain. A chain is involves the following:

• An input source – Microphone or Line Input
• A preamp
• Optional extra gear – Dynamics Processors, Equalizers, Effects Processors, and Converters
• A 30 second audio sample of the recorded audio
• Optional (but encouraged) notes about all gear used in the process.

The gear is displayed in a virtual rack where it can be reordered with drag-and-drop ease. Notes are displayed in the rack, and the individual gear’s pages can be accessed easily. Gear is added one item at a time to encourage thorough explanation of each piece. Chains can be tagged with terms for search purposes. At the moment, I’m using them to label “what instrument”:http://signalchains.com/tags/guitar is being recorded.

Users can Like and Comment on chains, hopefully fostering a community environment and further discussion about the process involved. Likes are virtual pats on the back, while Comments are a way to make it known to the public that you are far superior to the user who created the subject content. You know, just like anywhere else on the internet.

Audio

Arguably the most important piece of a chain is the audio. Nobody cares that you used all this expensive (or inexpensive) gear unless they can hear what it sounds like. This is why a chain requires an audio sample. Samples can be up to 30 seconds and need to be in some high-quality format (AIFF or WAV). Once you upload the sample, Signal Chains converts it down to MP3 and OGG formats and provides a nice little inline audio player for quick listening. The high quality audio is provided for more detailed analysis if someone chooses to download it.

Users

In order to take full advantage of Signal Chains, one is required to become a user. Users, as if by some magical super power acquisition, gain the ability to create chains and gear, comment on and like chains and gear, and follow other users. That’s right, we’re doing the whole Twitter relationship thing. A user has their own dashboard populated with activity from people they follow. It’s a quick and easy way to make sure your friends aren’t doing anything better than you.

The Nerdery

Signal Chains is a Ruby on Rails app developed by “Relatively Early Development”:http://relativelyearly.com (Matt and me). All the art and design was done by yours truly, while “Matt”:http://twitter.com/guitsaru made everything work wonderfully. If this thing takes off, we have big plans for it.

For now, you may want to follow @signalchains on Twitter for updates and all that jazz. If you’ve got some feedback for us, go crazy on our support site. If you’re interested in advertising on the site, contact us at info(at)relativelyearly.com.

⇓ Download the mp3

A remix I did of “Salt” by The Sailor Sequence. Enjoy the headroom.

I was planning on sharing the Live set as well, but it’s pretty large. I’m holding out to see if Ableton’s Share feature can handle stuff like this.

Salt Remix by Ross Brown is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
Permissions beyond the scope of this license may be available at http://rossisbrown.com.

⇓ Download the MP3

Disregarding audio quality, playing quality, singing quality, lyrical quality, and overall quality, I put this song together tonight.

Most of my gear is in several different places, so I’ve convinced myself it’s alright to make crummy recordings using the MacBook built-in microphone. The bass is the only exception, recorded straight through an FP10 pre, which I borrowed. Mixed in Ableton Live 7 without care. Enjoy.

Smile by Ross Brown is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
Permissions beyond the scope of this license may be available at http://rossisbrown.com.

This has been finished for a while but just recently released. It’s the debut release of a band several friends are in, Everyday/Everynight, and it’s called Moon Phases. I recorded, mixed, mastered, and played bass on this thing. I also painted the first moon on the cover art. All tracking was done within three days at my house. Mixing and mastering was done at The Punch in Lenexa, KS.

The main challenge throughout the whole process was not an uncommon one: retaining the dynamics of the songs without isolating you to a quiet room and an awesome stereo system. It’s definitely on average “quieter” than a lot of albums, but we all agreed it was an appropriate album for that sort of thing.

I co-mixed and mastered Matt Dill’s Lila Rasa, which is a beautiful and haunting album. It was a lot of fun to work on. Give it a listen.

I’ve been sitting on these for a while, and now they’ll finally see the light of day. I present to you Little Chip Ringtones, Vol. 1. This implies that there will probably be a volume two.

⇓ Download the .m4r files

This download is a zipped directory of .m4r ringtones of the following nuggets of aural delight:

“Asia”

⇓ Download the mp3 I’ve never been to Asia. This is proof.

“Going Up?”

⇓Download the mp3 Working title was “Rossa Bossa”.

“Skills”

⇓ Download the mp3 You’ve got them.

“Arpegginator”

⇓ Download the mp3 Highly audible synth ringtone. Bring sexy back.

“Sunbrella”

⇓ Download the mp3 Leftovers from a school project.

The first four ringtones use the same synths. They were created in Ableton Live. I might post the .als file if anyone is interested.

Enjoy. Feedback might encourage more.

Little Chip Ringtones, Vol. 1 by Ross Brown is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.

⇓ Download the mp3

This will probably get remixed, but here’s what I’ve go so far. The idea, mostly: electronic instruments on the left, real instruments on the right. It sort of happened.

It’s finally released!

A while ago adcBicycle began working on and near completed a new album. He ended up disliking what he came up with, so he sent all the songs out to some “friends” in the “electronic music community” to remix them.

For some reason (mostly due to em411) I was one of those. There are a lot of great musicians on this compilation, including He Can Jog and one of John McCaig’s many monikers. After I heard everyone else’s remixes I realized I did the least rearranging/adding/fun stuff to the original, but I guess it still turned out pretty cool. The whole album is great, and it’s neat to see everyone’s style influence Matt’s original idea.

Definitely check it out. It’s a free download. My contribution is track 3, which was track 6 in Matt’s original album order, and is titled “Needs #5”. I hope that’s confusing.

I made the mistake of using “Albatrocity” as a handle again. Apparently there’s already a band or some band’s album named that. I should have just stuck with my original name. So just to make things clear: On adcBicycle’s _Through the Mirror_, Albatrocity = Ross Brown.

Spread the word about this if you like it.

I recorded, mixed, and mastered the newest release from Doby Watson, Twenty Two. I also sang background vocals on a couple tracks. We went through several different sessions to arrive at the final result.

⇓ Download the mp3

Started this a while ago. Sort of finished it the other day. It’s a weak ending, but I like the rest of it. Plus, I got to overuse my new Pro VLA II

Banana Gun by Ross brown is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.
Permissions beyond the scope of this license may be available at http://rossisbrown.com/contact/.

⇓ Download the ALP

Original song is here.

This is an Ableton Live Pack (.alp) for use with Ableton Live. I created the set with Live 7 and I’m not sure if it’s backwards compatible. The set file should be, but I do make heavy use of some of the new features of 7:

• Gate Sidechaining
• Sampler ¹
• Drum Rack (awesome!)
• Analog (analog subtractive synth)
• Compressor ²

There are a few instances of Operator, too. I’m sure you can find viable alternatives ³ to these.

I’m also using a couple (free) third-party plugins:

• LiveCut from Smartelectronix
• mucoder’s wonderful hypercyclic

I’m having fun with my new copy of Live 7. I think it was definitely worth the student discounted price I paid for it, and I will surely use it -for educational purposes only-.

John Locke Syndrome by Ross Brown is licensed under a Creative Commons Attribution-Noncommercial 3.0 United States License.

¹ I think this was introduced in Live 6, but I believe it got some tweaks for the new version.

² This replaces Compressor I and Compressor II from earlier versions and is way better.

³ Might I point you to studiotoolz?

⇓ Download the mp3

This is a piece I’ve been working on for a while. I tried to experiment with things I don’t usually do, and I’m pretty pleased with how it turned out.

⇓ Download the mp3

UPDATE: Hear more audio of the Cascade Fat Head on Signal Chains.

Here’s a little test song I did mainly with the Cascade Fat Head.

Drums: MS Stereo – MXL 991 as Mid and Fat Head as side. In front of and about two feet above kit. About a foot right (low tom side) of snare to try and stereo image the toms a bit more. My high tom is right above the snare, and MS accurately depicts that. SM57 on snare and some cheap Nady kick mic in front of the kick. I was more concerned with the overhead sound. No EQ on Fat Head, scooped out some high mids on the MXL.

Electric Guitar (both): Fat Head about 6” from speaker, on-axis.

Acoustic Guitar: MS Stereo with Fat Head and MXL 991.

Bass: Fat Head about 4” from speaker, on-axis. Rounded off low frequencies at 100hz.

Tambourine: Fat Head. Duhhhh.

There are no effects on any tracks, save for some EQing I talked about above and light compression on the drum bus and master track.